GlassGard 30ml
(Professional Only)

Durability : 15 – 20,000 km

Applicable Surface : Glass Only

Curing Time : 30 mins (24 hrs fully cured)

Average Consumption / Car : 10-15ml

Layer : Multiple

Thickness : 2 – 4.5 Micron

Contact Angle : >100 degree

Hardness : Above 6H

Use TEVO Glass Degreaser to break down incurable scale and old wax that adhered to your glass surface. Rinse off the degreaser completely with water. Make sure the glass surface is completely dry before application.

Step 1 : (Preparation)
Soak the coating onto the application sponge or dry application tissue/towel. Apply small section at a time by dragging the coating horizontally (Left to Right) once and vertically (Top to Bottom) once. Make sure the coating covers every part of the glass surface.

Step 2 : (Scrubbing)

Immediately, use a microfiber cloth to buff the coated surface, do not pressurize the buffing process. Buff off completely until there is no visible striking or lining. (If you have hard time buffing off the striking and lining, recoat the particular surface again with step 1)

Step 3 : (Finish)

Wait for a minimum of 20 minutes for the coating to cure and bond with your glass surface; for best performance, allowing the coating to cure for 24 hours. Try to rinse through the surface with water and you will notice the amazing water beading and hydrophobicity results.