Description
Durability : 12 months & above
Applicable Surface : Metal, Aluminums & Stainless Steel
Curing Time : 3 hrs (24 hrs fully cured)
Average Consumption / Car : N/A
Layer : Multiple
Thickness : 2 – 4.5 Micron
Contact Angle : >100 degree
Hardness : Above 9H (Depends on amount of layer applied)
Directions for use
Wipe surface clean of dust or stains. Make sure are is dried completely before application.
Step 1 : (Coating)
Soak the coating onto the application sponge or dry application tissue/towel. Apply small section at a time by dragging the coating horizontally (Left to Right) once and vertically (Top to Bottom) once. Make sure the coating covers every part of the surface.
Step 2 : (Buffing)
Immediately, use a microfiber cloth to buff the coated surface, do not pressurize the buffing process. Buff off completely until there is no visible striking or lining. (If you have hard time buffing off the striking and lining, recoat the particular surface again with step 1)
